THERMISTOR, NTC Thermistor type:NTC Beta value:3892 Resistance:3kR Temperature, lower limit, beta value:0?В°C Temperature, upper limit beta value:50?В°C Diameter, body:2.4mm Length, lead:76mm Temperature, resistance:

THERMISTOR, NTC Thermistor type:NTC Beta value:3892 Resistance:3kR Temperature, lower limit, beta value:0?В°C Temperature, upper limit beta value:50?В°C Diame Available until stocks are exhausted Alternative available

LAMP, NEON BI-PIN 4MM Current, max:0.25mA LED / lamp size:T1.1/4 Lamp fitting type:Bi-pin Length / Height, external:14mm Length, lead:6.85mm Resistance, series 110v:220K 1/10W Resistance, series 240v:560K 1/10W V

MIL SPEC Relay Switch Function:DPDT Co

RFI Line Filter Current Rating:3A Termi

RELAY, PCB SPCO 24VDC Voltage, coil DC nom:24V Resistance, coil:2270R Approval Bodies:VDE, UL, CSA Current, contact rating:8A Power rating:220W Power, switching VA max:2000VA Available until stocks are exhausted

RELAY, INDUSTRIAL RT334024 Configuration, contact:SPNO Voltage, coil DC nom:24V Voltage, contact DC max:24V dc Current, contact DC max:16A Resistance, coil:1440R Power, coil DC:400mW

RELAY, PCB SPCO 12VDC Configuration, contact:SPCO Voltage, coil DC nom:12V Current, contact AC max:10A Voltage, contact AC max:250V ac Resistance, coil:320R Power, coil DC:360mW Flammability rating:UL94V-0, IP ra

Box Frame Solenoid Solenoid Duty Cycle:C

Box Frame Solenoid Solenoid Duty Cycle:Intermittent Load Force:36-0.12/26-1.00 Ounce-Inch Solenoid Operation:Pull Coil Resistance:37Ohm Leaded Process Compatible:Yes Operating Voltage:120V 24F872

LAMP, T3.1/4 MES 6.3V 0.945W LED / lamp size:T3.1/4 Lamp fitting type:MES (E10) Voltage rating, AC:6.3V Power rating:0.945W Current rating:0.15A Length / Height, external:30mm Available until stocks are exhausted

0.8MM ENTRY BOARD Length / Height, external:304.8mm Width, external:457.2mm

TERMINAL BLOCK, 10A 12WAY Ways, number of:12 Voltage rating, AC:400V Area, wire size max:12.5mm?? Pitch:10mm Current rating:10A Material, screw:Zinc plated Steel Temp, op. max:100?В°C Thread size:M3

ELASTOMER, 170 KIT 2.0KG Colour:Black/Grey Dielectric strength:18kV/mm Elongation:150% Standard:Meets UL94V-0 and MIL-S-23586D Strength, Tensile:3.5N/mm?? Strength, shear:1700N/m?? Temp, op. max:200?В°C Temp, op. min

LAMP 4V 0.5A HALOGEN

TERMINAL BLOCK, NYLON 16A 12WAY Ways, number of:12 Voltage rating, AC:380V Area, wire size max:3.5mm?? Pitch:10mm Approval Bodies:SEMKO, NEMKO, SEV, DEMKO, VDE Current rating:16A Depth, external:18.5mm Diameter, f

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:80 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:1.250H x 4.750W" 58F502

HEATSINK, 1.68C/W Thermal resistance:1.68?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:120.7mm Length / Height, external:31.8mm Depth, external:76.2mm

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:55 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:1.250H x 4.750W" 58F505

ESD SHOE, CLOG NAVY 4045 38 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:38 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG NAVY 4045 40 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:40 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG NAVY 4045 42 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:42 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG WHITE 4050 37 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:37 Standard:DIN 4843 part 100, DIN 61340 Upper type:

ESD SHOE, CLOG WHITE 4050 39 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:39 Standard:DIN 4843 part 100, DIN 61340 Upper type:

ESD SHOE, CLOG WHITE 4050 41 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:41 Standard:DIN 4843 part 100, DIN 61340 Upper type:

ESD SHOE, CLOG WHITE 4050 44 A Colour:White Length / Height, external:115mm Width, external:180mm Depth, external:320mm Mid-sole type:Cork Size, shoe/boot Euro:44 Standard:DIN 4843 part 100, DIN 61340 Upper type:

Static Protection Mat

Static Protection Mat Body Material:Vinyl material laminated to double-thick rubber foam External Width:36" Roll Length:60" Color:Silver with yellow border External Height:0.45" 61H6113

HEATSINK, 1.1C/W Thermal resistance:1.1?В°C/W Surface finish:Plain Material:Aluminium Width, external:108mm Length / Height, external:150mm Depth, external:58.7mm

LAMP, 4FT 36W GERMICIDAL Length:4ft Length / Height, external:1220mm Power rating:36W Temp, op. max:50?В°C Temp, op. min:-25?В°C

LAMP, SAFETY, PEARL, 40W, ES Lamp fitting type:ES (E27) Voltage rating, AC:230V Power rating:40W

SOLENOID 240VAC Depth, external:32mm Force, pull 25% duty @ distance A:1500gf Force, pull 25% duty @ distance B:700gf Force, pull continuous @ distance A:300gf Force, pull continuous @ distance B:200gf Length, slot

SOLENOID 12VDC Depth, external:32mm Force, pull 25% duty @ distance A:900gf Force, pull 25% duty @ distance B:400gf Force, pull continuous @ distance A:400gf Force, pull continuous @ distance B:100gf Length, slot:1

SOLENOID 24VDC Depth, external:32mm Force, pull 25% duty @ distance A:900gf Force, pull 25% duty @ distance B:400gf Force, pull continuous @ distance A:400gf Force, pull continuous @ distance B:100gf Length, slot:1

Terminal Block Number of Positions:10 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:10 65F1122

Terminal Block Number of Positions:14 Pitch Spacing:0.250" Wire Size (AWG):22-8 Number of Contacts:14 65F1124

Terminal Block Number of Positions:18 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:18 65F1126

Terminal Block Number of Positions:22 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:22 65F1128

Terminal Block Number of Positions:8 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:8 65F1121

FILTER PCB 5000PF Attenuation, 1 GHz:70dB Attenuation, 10 MHz:18dB Attenuation, 100 MHz:60dB Capacitance:5000pF Current rating:10A Temp, op. max:125?В°C Temp, op. min:-55?В°C Tolerance, capacitance +:100% Tolerance,

FILTER, PI-SECTION 1500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:45dB Capacitance:1500pF Current ra Available until stocks are exhausted Alternative available

FILTER, PI-SECTION 5500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:15dB Attenuation, 100 MHz:55dB Capacitance:5500pF Current r Available until stocks are exhausted Alternative available

PI FILTER 3000PF SOLDER MOUNT Attenuation, 1 GHz:50dB Attenuation, 10 GHz:50dB Attenuation, 100 MHz:50dB Capacitance:3000pF Current rating:25A Diameter, body:7.92mm Length / Height, external:17.44mm Length, lead:

Terminal Block Number of Positions:6 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:9 87F5257

XENON BEACON, RED Colour:Red Current, consumption @100V:37mA Current, consumption @12V:130mA Current, consumption @24V:95mA Current, consumption @50V:83mA Diameter, External:77mm Flash rate, per minute:75 Height:

XENON BEACON, RED Colour:Red Current, consumption @100V:70mA Current, consumption @12V:255mA Current, consumption @24V:190mA Current, consumption @50V:112mA Diameter, External:77mm Flash rate, per minute:75 Heigh

TAB TERM BLOCK 3 POLE 40A Ways, number of:3 Voltage rating, AC:450V Area, wire size max:6mm?? Pitch:17.7mm Approval category:UL, CSA, VDE Current rating:40 Available until stocks are exhausted Alternative available

LAMP, SPARE Power consumption:36W

XENON BEACON, RED Colour:Red Current, consumption @100V:37mA Current, consumption @12V:130mA Current, consumption @24V:95mA Current, consumption @50V:83mA Diameter, External:77mm Flash rate, per minute:75 Height:

Heat Sink Body Material:Aluminum Thermal Resistance:72 C/W Color:Black 58F1004

SOLENOID 240VAC Depth, external:32mm Force, pull 25% duty @ distance A:1300gf Force, pull 25% duty @ distance B:600gf Force, pull continuous @ distance A:400gf Force, pull continuous @ distance B:200gf Length, slot

SOLENOID 12VDC Depth, external:32mm Force, pull 25% duty @ distance A:1250gf Force, pull 25% duty @ distance B:300gf Force, pull continuous @ distance A:350gf Force, pull continuous @ distance B:150gf Length, lead:

SOLENOID 24VDC Depth, external:32mm Force, pull 25% duty @ distance A:1250gf Force, pull 25% duty @ distance B:300gf Force, pull continuous @ distance A:350gf Force, pull continuous @ distance B:150gf Length, slot:

SOLENOID, 12VDC WITH SPRING Depth, external:59.2mm Force, pull 25% duty @ distance A:1250gf Force, pull 25% duty @ distance B:300gf Force, pull continuous @ distance A:350gf Force, pull continuous @ distance B:150gf

FILTER, PUSH FIT 500PF Attenuation, 1 GHz:35dB Attenuation, 10 GHz:40dB Capacitance:500pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length / Height, external:2.79mm Temp, op. max:125?В°C Temp,

FILTER, PUSH FIT 1000PF Attenuation, 1 GHz:35dB Attenuation, 10 GHz:45dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:20dB Capacitance:1000pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length

FILTER, PUSH FIT 100PF Attenuation, 1 GHz:20dB Attenuation, 10 GHz:28dB Attenuation, 100 MHz:3dB Capacitance:100pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length / Height, external:2.79mm T

FILTER, PI-SECTION 1500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:45dB Capacitance:1500pF Current rating:10A Diameter, body:6.35mm Diameter, fixing hole:5.1mm

FILTER, PI-SECTION 5000PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:20dB Attenuation, 100 MHz:65dB Capacitance:5000pF Current r Available until stocks are exhausted Alternative available

HEATSINK, 1.15C/W Thermal resistance:1.15?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:120.7mm Length / Height, external:66.7mm Depth, external:76.2mm Available until stocks are exhausted

TERMINAL BLOCK, 12WAY Ways, number of:12 Voltage rating, AC:380V Area, wire size max:2.5mm?? Pitch:10mm Approval Bodies:UL Centres, fixing:10mm Current rating:10A Diameter, fixing hole:3.25mm Material, contact:Br

FERRITE CORE, 2 HOLE Length / Height, external:10.8mm Width, external:10.9mm Depth, external:5.4mm Grade, ferrite:4A11

Heat Sink Body Material:Aluminum Thermal Resistance:58 C/W Color:Black 58F506

HEATSINK, TO-3 0.95C/W Case style:TO-3 Thermal resistance:0.95?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:120.7mm Length / Height, external:66.7mm Depth, external:140.2mm

CORE, IIC10-14/4-3E6 Grade, ferrite:3E6 Temp, op. max:150?В°C Temp, op. min:-55?В°C

LAMP, BA9S HALOGEN 12V Lamp fitting type:BA9s Voltage rating, AC:12V Power rating:10W Length / Height, external:33mm Light output, total:200lm Time, opera Available until stocks are exhausted Alternative available

Heat Sink Body Material:Aluminum Thermal Resistance:47 C/W Color:Black 58F509

XENON BEACON, RED Colour:Red Current, consumption @12V:250mA Current, consumption @24V:200mA Diameter, External:148mm Flash rate, per minute:75 Height:70mm IP rating:IP65 Power, output:5W Voltage, supply DC max:

Static Protection Mat External Width:48

AMBER LENS Colour, lens:Amber Cut-out size, panel:23mm Depth, external:23mm Diameter, External:36mm

LENS, GREEN Colour, lens:Green Cut-out size, panel:23mm Depth, external:23mm Diameter, External:36mm

HEATSINK, 1.5C/W Thermal resistance:1.5?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:100mm Length / Height, external:40mm Depth, external:100mm

HEATSINK, 1C/W Thermal resistance:1?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:100mm Length / Height, external:40mm Depth, external:250mm

CAPACITIVE FILTER, FEED-THRU 10000PF Attenuation, 1 GHz:50dB Attenuation, 1 MHz:4dB Attenuation, 10 GHz:55dB Attenuation, 10 MHz:21dB Attenuation, 100 MHz:35dB Capacitance:10000pF Current rating:10A Diameter, bod

CAPACITIVE FILTER, FEED-THRU 4700PF Attenuation, 1 GHz:45dB Attenuation, 10 GHz:55dB Attenuation, 10 MHz:15dB Attenuation, 100 MHz:30dB Capacitance:4700pF Current rating:10A Diameter, body:4mm Diameter, lead:0.79

CAPACITIVE FILTER, FEED-THRU 1000PF Attenuation, 1 GHz:35dB Attenuation, 10 GHz:45dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:20dB Capacitance:1000pF Current rating:10A Diameter, body:4mm Diameter, lead:0.79m

NTC Thermistor Resistance:1kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:17.33 Terminal Type:Radia 70K8737

NTC Thermistor Resistance:2252Ohm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Rad 70K8738

NTC Thermistor Resistance:10kOhm Therm

NTC Thermistor Resistance:5kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Radial 29F256

NTC Thermistor Resistance:30kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.15 Terminal Type:Radia 29F205

NTC Thermistor Resistance:100kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:34.82 Terminal Type:Radi 29F206

NTC Thermistor 29F214

NTC Thermistor Resistance:10kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Radi 70K8744

NTC Thermistor Resistance:10kOhm Thermistor Tolerance:+/- 0.50% Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:23.51 Terminal Type:Ra 29F224

NTC Thermistor Resistance:30kOhm Mounting Type:Through Hole Resistance Ratio:29.15 Terminal Type:Radial Leaded 29F225

SAFETY RELAY, 1 CHANNEL 24VAC Configuration, contact:3 N/O+ 1 N/C Voltage, coil AC nom:24V Capacity, switching:4A@250VAC Voltage, supply:24V Approval Bodies:EN60204, EN292, TUV Length / Height, external:82mm Width

SAFETY RELAY, 2 CHANNEL 110VAC Configuration, contact:3 N/O+ 1 N/C Voltage, coil AC nom:110V ac Capacity, switching:10mA @10V Voltage, supply:110V Approval Bodies:TUV, EN60204-1, EN954, EN292 Length / Height, exter

SAFETY RELAY, 2-HAND 24VAC/DC Configuration, contact:3 N/O+ 1 N/C Voltage, coil DC nom:24V Voltage, coil AC nom:24V Capacity, switching:4A@250VAC Voltage, supply:24V Approval Bodies:TUV, prEN574 TYPEIIIB, EN60204,

SAFETY RELAY, 1 CHANNEL 24VAC/DC Configuration, contact:3 N/O+2N/C Voltage, coil DC nom:24V Voltage, coil AC nom:24V Capacity, switching:250V AC, 4A

SAFETY RELAY, 2 CHANNEL 24VDC Configuration, contact:2 N/O+1 N/C Voltage, coil DC nom:24V Capacity, switching:250V AC, 4A

TIMER, FAILSAFE 2NO 24/110/240VAC Time range:0.1sec

Heat Sink Body Material:Aluminum Thermal Resistance:34 C/W Color:Black Size/Dimensions:4.500H x 4.750W" 58F521

NTC Thermistor

SOLENOID 6VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf Length, slot:12.

SOLENOID 12VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf Power rating:3W

SOLENOID 24VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:250gf Force, pull 25% duty @ distance B:125gf Force, pull continuous @ distance A:110gf Force, pull continuous @ distance B:50gf Power, coil c

SOLENOID, 12VDC WITH SPRING Depth, external:29.35mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf L

HEATSINK, 1.2C/W Thermal resistance:1.2?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:130mm Length / Height, external:32mm Depth, external:100mm

SOLENOID, PCB 6VDC Depth, external:12mm Force, pull 25% duty @ distance A:105gf Force, pull 25% duty @ distance B:50gf Force, pull continuous @ distance A:35gf Force, pull continuous @ distance B:10gf Power, coil c

THERMISTOR, NTC Thermistor type:NTC Beta value:3892 Resistance:3kR Temperature, lower limit, beta value:0?В°C Temperature, upper limit beta value:50?В°C Diame Available until stocks are exhausted Alternative available

LAMP, NEON T1.1/4 W/E Current, max:0.27mA Current, min:0.22mA LED / lamp size:T1.1/4 Lamp fitting type:Wire ended Length / Height, external:10mm Length, l Available until stocks are exhausted Alternative available

MIL SPEC Relay Switch Function:DPDT Co

MIL SPEC Relay Switch Function:DPDT Co

STATUS INDICAT 2W PNL MT Accuracy, percentage:2% Colour, LED:Red/Green Current, supply:15mA Depth, external:20mm Display technology:LED Full scale reading:5V dc Height, panel cut-out:14.5mm Length / Height, exter

RELAY, INDUSTRIAL RT334012 Configuration, contact:SPNO Voltage, coil DC nom:12V Voltage, contact DC max:110V dc Current, contact DC max:16A Resistance, coil:360R Power, coil DC:400mW

RELAY, DIN SPCO 24VDC Configuration, contact:SPCO Current rating:16A Voltage, coil DC nom:24V Approval Bodies:E214025 Width, external:15.5mm Flammability rating:UL94V-0 Power, switching VA max:4000VA Resistance,

RELAY, PCB SPCO 24VDC Configuration, contact:SPCO Voltage, coil DC nom:24V Current, contact AC max:10A Voltage, contact AC max:250V ac Resistance, coil:1280R Power, coil DC:360mW Flammability rating:UL94V-0, IP r

Box Frame Solenoid Solenoid Duty Cycle:C

Box Frame Solenoid Solenoid Duty Cycle:Intermittent Load Force:100-0.12/20-1.00 Ounce-Inch Solenoid Operation:Pull Coil Resistance:15.8Ohm Leaded Process Compatible:Yes Operating Voltage:24V 24F885

FLEXIBLE LAMINATE 305X500 Depth, external:0.05mm Length / Height, external:500mm Material:polyester Sides, number of copper coated:1 Thickness, copper:0.035 Width, external:305mm

1.5MM ALUM. EXIT BOARD Length / Height, external:304.8mm Width, external:457.2mm

LIGHTSWITCH SURROUND CLEAR

RTV SILICONE, 9161 KIT 5.0KG Dielectric strength:22kV/mm Elongation:150% Temp, op. max:250?В°C Temp, op. min:-50?В°C Time, cure:24h

TERMINAL BLOCK, NYLON 10A 12WAY Ways, number of:12 Voltage rating, AC:380V Area, wire size max:2.5mm?? Pitch:10mm Approval Bodies:SEMKO, NEMKO, SEV, DEMKO, VDE Current rating:10A Depth, external:19mm Diameter, fix

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:80 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:1.250H x 4.750W" 58F500

HEATSINK, TO-3 1.68C/W Case style:TO-3 Thermal resistance:1.68?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:120.7mm Length / Height, external:31.8mm Depth, external:76.2mm

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:55 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:1.250H x 4.750W" 58F503

ESD SHOE, CLOG NAVY 4045 37 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:37 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG NAVY 4045 39 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:39 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG NAVY 4045 41 A Colour:Navy Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:41 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG NAVY 4045 44 A Colour:Navy Length / Height, external:115mm Width, external:180mm Depth, external:320mm Mid-sole type:Cork Size, shoe/boot Euro:44 Standard:DIN 4843 part 100, DIN 61340 Upper type:Le

ESD SHOE, CLOG WHITE 4050 38 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:38 Standard:DIN 4843 part 100, DIN 61340 Upper type:

ESD SHOE, CLOG WHITE 4050 40 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:40 Standard:DIN 4843 part 100, DIN 61340 Upper type:

ESD SHOE, CLOG WHITE 4050 42 A Colour:White Length / Height, external:110mm Width, external:150mm Depth, external:310mm Mid-sole type:Cork Size, shoe/boot Euro:42 Standard:DIN 4843 part 100, DIN 61340 Upper type:

Static Protection Mat 50H8211

Static Protection Mat Body Material:Vinyl material laminated to double-thick rubber foam External Width:36" Roll Length:48ft Color:Silver with yellow border External Height:0.45" 61H6112

HEATSINK, 1.4C/W Thermal resistance:1.4?В°C/W Surface finish:Plain Material:Aluminium Width, external:108mm Length / Height, external:100mm Depth, external:58.7mm

HEATSINK, 0.82C/W Thermal resistance:0.82?В°C/W Surface finish:Plain Material:Aluminium Width, external:108mm Length / Height, external:300mm Depth, external:58.7mm

LAMP, BC GLS GLASSGUARD 40W Lamp fitting type:BC (B22) Voltage rating, AC:230V Power rating:40W Temp, op. max:270?В°C

LAMP, UVA 40W GLASSGUARD Power rating:40W Temp, op. max:50?В°C Temp, op. min:-25?В°C Available until stocks are exhausted

SOLENOID 240VAC Depth, external:32mm Force, pull 25% duty @ distance A:1500gf Force, pull 25% duty @ distance B:700gf Force, pull continuous @ distance A:300gf Force, pull continuous @ distance B:200gf Length, slot

SOLENOID 12VDC Depth, external:32mm Force, pull 25% duty @ distance A:900gf Force, pull 25% duty @ distance B:400gf Force, pull continuous @ distance A:400g Available until stocks are exhausted Alternative available

SOLENOID 24VDC Depth, external:32mm Force, pull 25% duty @ distance A:900gf Force, pull 25% duty @ distance B:400gf Force, pull continuous @ distance A:400gf Force, pull continuous @ distance B:100gf Length, slot:1

Terminal Block Number of Positions:12 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:12 65F1123

Terminal Block Number of Positions:16 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:16 65F1125

Terminal Block Number of Positions:20 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:20 65F1127

Terminal Block Number of Positions:6 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:6 65F1120

FILTER PCB 5000PF Attenuation, 1 GHz:70dB Attenuation, 10 MHz:18dB Attenuation, 100 MHz:60dB Capacitance:5000pF Current rating:10A Temp, op. max:125?В°C Te Available until stocks are exhausted Alternative available

FILTER PCB 1500PF Attenuation, 1 GHz:70dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:45dB Capacitance:1500pF Current rating:10A Temp, op. max:125?В°C Temp, op. min:-55?В°C Tolerance, capacitance +:100% Tolerance,

FILTER, PI-SECTION 1500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:45dB Capacitance:1500pF Current rating:10A Diameter, body:4.95mm Diameter, fixing hole:4mm

FILTER, PI-SECTION 5500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:15dB Attenuation, 100 MHz:55dB Capacitance:5500pF Current rating:10A Diameter, body:4.95mm Diameter, fixing hole:4mm

Terminal Block Number of Positions:4 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:6 87F5256

Terminal Block Number of Positions:8 Pitch Spacing:0.250" Wire Size (AWG):20-18 Number of Contacts:15 87F5258

XENON BEACON, AMBER Colour:Amber Current, consumption @100V:37mA Current, consumption @12V:130mA Current, consumption @24V:95mA Current, consumption @50V:83mA Diameter, External:77mm Flash rate, per minute:75 Hei

TAB TERM BLOCK 3 POLE 40A Ways, number of:3 Voltage rating, AC:450V Area, wire size max:6mm?? Pitch:17.7mm Approval category:UL, CSA, VDE Current rating:40A Depth, external:15mm Length / Height, external:24mm Mat

LIGHT BOX, SUNSHINE SIMULATOR LAMP Depth, external:83mm Height:495mm Power rating:72W Voltage, supply AC max:240V ac Voltage, supply AC min:230V ac Weight:3.18kg Width, external:340mm

XENON BEACON, RED Colour:Red Current, consumption @100V:29mA Current, consumption @12V:112mA Current, consumption @24V:63mA Current, consumption @50V:50mA Diameter, External:77mm Flash rate, per minute:60 Height:

Heat Sink Body Material:Aluminum Thermal Resistance:72 C/W Color:Black 58F1003

Indicator Lamp 94F5256

SOLENOID 240VAC Depth, external:32mm Force, pull 25% duty @ distance A:1300gf Force, pull 25% duty @ distance B:600gf Force, pull continuous @ distance A:40 Available until stocks are exhausted Alternative available

SOLENOID 12VDC Depth, external:32mm Force, pull 25% duty @ distance A:1250gf Force, pull 25% duty @ distance B:300gf Force, pull continuous @ distance A:350gf Force, pull continuous @ distance B:150gf Length, slot:

SOLENOID 24VDC Depth, external:32mm Force, pull 25% duty @ distance A:1250gf Force, pull 25% duty @ distance B:300gf Force, pull continuous @ distance A:350gf Force, pull continuous @ distance B:150gf Length, slot:

PI FILTER 3000PF BUSH MOUNT Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:10dB Attenuation, 100 MHz:55dB Capacitance:3000pF Current rating:25A Depth, external:9.52mm Length / Height, extern

FILTER, PUSH FIT 5000PF Attenuation, 1 GHz:45dB Attenuation, 10 GHz:55dB Attenuation, 10 MHz:15dB Attenuation, 100 MHz:25dB Capacitance:5000pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length

FILTER, PUSH FIT 2700PF Attenuation, 1 GHz:40dB Attenuation, 10 GHz:50dB Attenuation, 10 MHz:10dB Attenuation, 100 MHz:25dB Capacitance:2700pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length

FILTER, PUSH FIT 5PF Capacitance:5pF Current rating:5A Diameter, body:3.71mm Diameter, lead:0.76mm Length / Height, external:2.79mm Temp, op. max:125?В°C Temp, op. min:-55?В°C Voltage rating, DC:300V

FILTER, PI-SECTION 1500PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:45dB Capacitance:1500pF Current rating:10A Diameter, body:6.35mm Diameter, fixing hole:5.1mm

FILTER, PI-SECTION 5000PF Attenuation, 1 GHz:70dB Attenuation, 10 GHz:70dB Attenuation, 10 MHz:20dB Attenuation, 100 MHz:65dB Capacitance:5000pF Current rating:10A Diameter, body:6.35mm Diameter, fixing hole:5.1m

FERRITE CORE, 2 HOLE Length / Height, external:10.8mm Width, external:10.9mm Depth, external:5.4mm Grade, ferrite:4A11 Available until stocks are exhausted Alternative available

TERMINAL BLOCK, 12WAY Ways, number of:12 Voltage rating, AC:380V Area, wire size max:2.5mm?? Pitch:10mm Approval Bodies:UL Centres, fixing:10mm Current ra Available until stocks are exhausted Alternative available

TERMINAL BLOCK, NYLON 16A 12WAY Ways, number of:12 Voltage rating, AC:380V Area, wire size max:4mm?? Pitch:10mm Approval Bodies:SEMKO, NEMKO, SEV, DEMKO, VDE Current rating:16A Depth, external:19mm Diameter, fixin

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:58 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:2.625H x 4.750W" 58F508

HEATSINK, 0.95C/W Thermal resistance:0.95?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:120.7mm Length / Height, external:66.7mm Depth, external:140.2mm

LAMP, BA9S HALOGEN 12V Lamp fitting type:BA9s Voltage rating, AC:12V Power rating:10W Length / Height, external:33mm Light output, total:200lm Time, operating life:240h

FAN, AXIAL 5200 M3/H Flow rate:5200l/s Depth, external:308mm Extraction Rate:5200l/s Frequency:50Hz IP rating:IP55 Length / Height, external:510mm Noise:66dB Poles, number of Available until stocks are exhausted

Heat Sink Package/Case:TO-3 Body Material:Aluminum Thermal Resistance:42 C/W Mounting Type:Through Hole Color:Black Size/Dimensions:3.000H x 4.750W" 58F334

Static Protection Mat External Width:36" External Height:24" 61H6115

CLEAR LENS Colour, lens:clear Cut-out size, panel:23mm Depth, external:23mm Diameter, External:36mm

LENS, BLUE Colour, lens:Blue Cut-out size, panel:23mm Depth, external:23mm Diameter, External:36mm

LAMP, BENCH/DESK WHITE Colour:White Height:560mm Lamp fitting type:BC (Bayonet Cap) Length, lead:1.4m Power rating:60W

HEATSINK, 1.2C/W Thermal resistance:1.2?В°C/W Surface finish:Black Anodised Material:Aluminium Width, external:100mm Length / Height, external:40mm Depth, external:150mm

CAPACITIVE FILTER, FEED-THRU 10000PF Attenuation, 1 GHz:50dB Attenuation, 1 MHz:4dB Attenuation, 10 GHz:55dB Attenuation, 10 MHz:21dB Attenuation, 100 MHz: Available until stocks are exhausted Alternative available

CAPACITIVE FILTER, FEED-THRU 4700PF Attenuation, 1 GHz:45dB Attenuation, 10 GHz:55dB Attenuation, 10 MHz:15dB Attenuation, 100 MHz:30dB Capacitance:4700pF Available until stocks are exhausted Alternative available

CAPACITIVE FILTER, FEED-THRU 1000PF Attenuation, 1 GHz:35dB Attenuation, 10 GHz:45dB Attenuation, 10 MHz:5dB Attenuation, 100 MHz:20dB Capacitance:1000pF Available until stocks are exhausted Alternative available

NTC Thermistor Resistance:100Ohm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:11.49 Terminal Type:Radi 70K8736

NTC Thermistor Resistance:2252Ohm Thermistor Tolerance:+/- 1% Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Radi 29F229

NTC Thermistor Resistance:3kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Radia 70K8739

NTC Thermistor Resistance:10kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:23.51 Terminal Type:Radi 70K8740

NTC Thermistor Resistance:5kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type:Radia 70K8741

NTC Thermistor Resistance:30kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.15 Terminal Type:Radi 70K8742

NTC Thermistor Resistance:100kOhm Thermistor Tolerance:+/- 1% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:34.82 Terminal Type:Rad 70K8743

NTC Resistance:10kOhm Thermistor Tolera

NTC Thermistor Leaded Process Compatible:No Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Terminal Type:Radial Leaded 29F222

NTC Thermistor Resistance:10kOhm Thermistor Tolerance:+/- 0.50% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:23.51 Terminal Type:R 70K8745

NTC Thermistor Resistance:2252Ohm Thermistor Tolerance:+/- 0.50% Leaded Process Compatible:Yes Mounting Type:Through Hole Peak Reflow Compatible (260 C):No Resistance Ratio:29.26 Terminal Type: 70K8746

SAFETY RELAY, 2 CHANNEL 24VAC/DC Configuration, contact:3 N/O+ 1 N/C Voltage, coil DC nom:24V Voltage, coil AC nom:24V Capacity, switching:10mA @10V Voltage, supply:24V Approval Bodies:TUV, EN60204-1, EN954, EN292

SAFETY RELAY, 2 CHANNEL 240VAC Configuration, contact:3 N/O+ 1 N/C Voltage, coil AC nom:230V Capacity, switching:10mA @10V Voltage, supply:230V Approval Bodies:TUV, EN60204-1, EN954, EN292 Length / Height, external

SAFETY RELAY, 2-HAND 240VAC Configuration, contact:3 N/O+ 1 N/C Voltage, coil AC nom:230V Capacity, switching:4A@250VAC Voltage, supply:230V Approval Bodies:TUV, prEN574 TYPEIIIB, EN60204, EN292 Length / Height, ex

SAFETY RELAY, 1 CHANNEL 110/230VAC Configuration, contact:3 N/O+2N/C Voltage, coil AC nom:230V Capacity, switching:250V AC, 4A

SAFETY RELAY, DUAL-TIMED 0-10S Configuration, contact:2N/O+1N/C Voltage, coil DC nom:24V Voltage, coil AC nom:24V Capacity, switching:250V AC, 4A

NTC Thermistor 29F211

NTC Thermistor Mounting Type:Through Ho

TRUNKING, 16X16MM 15M COIL Approval Bodies:BS4678 Part 4 Colour:White Height:16mm Length / Height, external:15m Material:PVC-U Width, external:16mm

SOLENOID 6VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf Length, slot:12.

SOLENOID 12VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf Power, coil con

SOLENOID 24VDC Depth, external:19.4mm Force, pull 25% duty @ distance A:250gf Force, pull 25% duty @ distance B:125gf Force, pull continuous @ distance A:11 Available until stocks are exhausted Alternative available

SOLENOID, 24VDC WITH SPRING Depth, external:29.35mm Force, pull 25% duty @ distance A:230gf Force, pull 25% duty @ distance B:55gf Force, pull continuous @ distance A:80gf Force, pull continuous @ distance B:25gf L

SOLENOID, PCB 6VDC Depth, external:12mm Force, pull 25% duty @ distance A:105gf Force, pull 25% duty @ distance B:50gf Force, pull continuous @ distance A:35gf Force, pull continuous @ distance B:10gf Power, coil c

SOLENOID, PCB 12VDC Depth, external:12mm Force, pull 25% duty @ distance A:105gf Force, pull 25% duty @ distance B:50gf Force, pull continuous @ distance A:35gf Force, pull continuous @ distance B:10gf Power, coil