M&W 50-4"(100MM) DIVIDERS

M&W 50-8"(200MM) DIVIDERS

BUBBLE ETCH TANK Capacity:5l Depth, external:522mm Length / Height, external:375mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, supply:240V Width, external:178mm

UNIVERSAL TANK Capacity:5l Depth, external:522mm Length / Height, external:375mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, sup Available until stocks are exhausted Alternative available

ETCH / WASH TANK Capacity:5l Depth, external:525mm Length / Height, external:380mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, s Available until stocks are exhausted Alternative available

THREE TANK UNIT Capacity:5l Depth, external:525mm Length / Height, external:380mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, supply:240V Width, external:400mm

GAUGE BLOCK, SET Range, measuring max:1.20mm Range, measuring min:1.01mm Standard:

TIP, SC7000 SLIM 0.8MM DIA Temp, op. max:500?В°C Diameter, external:0.8mm Tip type:Slim

CAROLUS 1/2" DRV. SOCKET SET Driver size:1/2" Kit contents:6 point sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 28, 30, 32mm, Adaptor 1/2" x 5/16", Universal joint, Sliding T-handle, Extensions 75/12

Inspection Magnifier Color:Light Gray 52F8888

Snap-On Lens For Use With:LUXOs KFM Seri

VITREX PLASTIC TUBE CUTTER 502140

ESD PLIER 110MM Jaw type:Full Flush Length:110mm Handle type:ESD Capacity, cutting:1.2mm Length, blade:13mm Length, jaw:6.5mm Weight:67g Width, jaw:10.5mm

Tools, Data capture 86H7784

MANOMETER

QUICK-GRIP BAR CLAMP 152MM/6IN 506QC Capacity, jaw max:152mm

TORQUE WRENCH

STELLITE DRILL 1/2" Diameter, External:1/2" Diameter, drill bit Imperial:1/2" Material:Stellite

STELLITE DRILL 1/8" Diameter, External:1/8" Diameter, drill bit Imperial:1/8" Material:Stellite

STELLITE DRILL 3/16" Diameter, External:3/16" Diameter, drill bit Imperial:3/16" Material:Stellite

STELLITE DRILL 3/8" Diameter, External:3/8" Diameter, drill bit Imperial:3/8" Material:Stellite

STELLITE DRILL 5/32" (4.0MM) Diameter, External:5/32" Diameter, drill bit Imperial:5/32" Material:Stellite

STELLITE DRILL 7/16" Diameter, External:7/16" Diameter, drill bit Imperial:7/16" Material:Stellite

STELLITE DRILL 9/16" Diameter, External:9/16" Diameter, drill bit Imperial:9/16" Material:Stellite

STELLITE DRILL SETS 1/8"-3/8" Material:Stellite

PROTRACTOR, 6"/12"BLADES Accuracy:5 minutes Angle:360?В° Angle, min:0?В°

M&W 51-12"(300MM) INSIDE CALIPERS

M&W 51-4"(100MM) INSIDE CALIPERS

M&W 51-8"(200MM) INSIDE CALIPERS

PORTABLE VDE-TESTER ULTRA 0751 Depth, external:40mm Length / Height, external:195mm Resistance, insulation:19.99MR Safety category:VDE0701, 0702, 0751 Weight:500g Width, external:100mm

CUTTERS, STRIPPERS 120MM Length:120mm Capacity, cutting:18-30 AWG Length, head:21mm

MANOMETER , DIFFERENTIAL

HOLE SAW, ONE PIECE 32MM Size:32mm Available until stocks are exhausted

SALTER POSTAL SCALE 511A

MANOMETER (0 TO 20MBAR) Accuracy, percentage:0.5% Battery size code:9V Depth, external:42mm Length / Height, external:191mm Pressure measuring ranges:0 to 20 hPa Resolution:0.01 hPa Temp, op. max:60?В°C Temp, op. m

MANOMETER (0 TO 200MBAR) Accuracy, percentage:0.5% Battery size code:9V Depth, external:42mm Length / Height, external:191mm Pressure measuring ranges:0 to 200 hPa Resolution:0.1 hPa Temp, op. max:60?В°C Temp, op.

MANOMETER, 0-2000MBAR Accuracy, percentage:0.5% Depth, external:42mm Length / Height, external:202mm Pressure measuring ranges:0 to 2000 mbar Temp, op. max:60?В°C Temp, op. min:0?В°C Temperature, storage max:70?В°C Tem

MANOMETER, 0-20MBAR Accuracy, percentage:0.5% Depth, external:42mm Length / Height, external:202mm Pressure measuring ranges:0 to 20 mbar Temp, op. max:60?В°C Temp, op. min:0?В°C Temperature, storage max:70?В°C Tempera

HOLE SAW, VARIPITCH HSS 32MM Diameter, external:32mm Capacity, cutting:32mm

HOLE SAW, VARIPITCH HSS 44MM Capacity, cutting:44mm

HOLE SAW, VARIPITCH HSS 48MM Diameter, external:48mm Capacity, cutting:48mm

HOLE SAW, VARIPITCH HSS 19MM Diameter, external:19mm Capacity, cutting:19mm

HOLE SAW, VARIPITCH HSS 22MM Diameter, external:22mm Capacity, cutting:22mm

CUTTERS, SIDE SEMI FLUSH 115MM Capacity, cutting copper wire:1.61mm Length:115mm Edge Finish/Profile:Semi Flush Length, jaw:12mm

HAND MAGNIFIER 5146ILLUMINATED

HAND MAGNIFIER 5148ILLUMINATED

HOLE SAW, VARIPITCH HSS 76MM Capacity, cutting:76mm

HOLE SAW, VARIPITCH HSS 102MM Capacity, cutting:102mm

J&S H/D REV LATH CNTR 4MT PRV LNZR 5155

HOLE SAW, VARIPITCH HSS 152MM Capacity, cutting:152mm Available until stocks are exhausted

EXTRACTION TOOL

MEASURING,PROTRACTOR,PROTRACTOR,MEASURING, PROTRACTOR,MEASURING TOOLS,STAINLESS STEEL PROTRACTOR ,PEC (PRODUCT ENGINEERING CORP) 95B9674

QUICK-GRIP BAR CLAMP 457MM/18IN 518QC Capacity, jaw max:457mm

HOLE SAW, VARIPITCH HSS 38MM Diameter, external:38mm Capacity, cutting:38mm

TOOLS,INSPECTION,MAGNIFIERS,JEWELER LOUP

M&W 52-12"(300MM) OUTSIDE CALIPERS

M&W 52-4"(100MM) OUTSIDE CALIPERS

M&W 52-8"(200MM) OUTSIDE CALIPERS

REMS AMIGO 1 THREADING MACHINE NPT

CASE/VOLTAGE TESTER VP500/CLAMP ACD-10

ARBOR, 9.5MM HEX SHANK Material:HSS

VDE EDUCATION TESTBOARD PM1 Current rating:16A Depth, external:150mm Length / Height, external:800mm Safety category:VDE0701/0702 Voltage, working:42V Weight:34kg Width, exter Available until stocks are exhausted

EDUCATION BOARD PM1U INCL ULTRA 0701/2S Current rating:16A Depth, external:209mm Length / Height, external:800mm Safety category:VDE0701/0702 Voltage, working:42V Weight:34kg Available until stocks are exhausted

CUTTERS, PCB DISTANCE 120MM Capacity, cutting copper wire:1.2mm Length:120mm Capacity, cutting:1.2mm Distance, Cut:1.5mm Length, blade:3mm

HI PWR HALOGEN ILLUM MAGNIFR 5210/10 10X

HI PWR TILT STAND ILLUM READERX6 LESSBAT

MAGNIFIER CLIP ON X2.5 Depth, external:11mm Height:50mm Magnification factor:2.5 Width, external:35mm

ESD PLIER 115MM Jaw type:Side cutter flush Length:115mm Handle type:ESD Capacity, cutting:1.2mm Length, blade:12mm Length, jaw:6.5mm Weight:67g Width, jaw:10.5mm

QUICK-GRIP BAR CLAMP 610MM/24IN 524QC Capacity, jaw max:610mm

SOCKET, 3/8" EXTRA DEEP 13MM Driver size:3/8" AF size:0.512" Length:50mm Length, spindle:40mm Socket Reach:25mm Width, AF:13mm Available until stocks are exhausted

HEIGHT GAUGE, VERNIER Accuracy:0.05mm/0.0025" Graduation:0.02mm Range, measuring max:300mm Range, measuring min:0mm Resolution:0.01mm/0.0005"

HEIGHT GAUGE, DIAL Accuracy:0.05mm/0.0025" Graduation:0.01mm Range, measuring max:450mm Range, measuring min:0mm Resolution:0.01mm/0.0005" Available until stocks are exhausted

NEMS AMIGO 2 THREADING MACHINE BSBT

EYE MAGNIFIER 5406

S&J TENON SAW R52 8"X 20PT TPI (f):20

EYE MAGNIFIER 5410

S&J TENON SAW R52 12" TPI (f):13

HOOK, DOUBLE END Diameter, external:1.5mm Length:155mm Weight:15g

PLIERS, LONG NOSE 120MM Jaw type:Long nose Length:120mm Length, jaw:23mm Width, jaw:1.5mm

Tools, Extractors Product Description:Disassembly/Removal Tool for RJ Field Bus 544 Connectors 04H9599

Drill Bit 14C3913

STEEL WOOL 0 1KG Weight:1kg

STEEL WOOL 0000 1KG Weight:1kg

STEEL WOOL 00 250G Weight:250g

ST WOOL 0000 250G Weight:250g

STEEL WOOL 0000 100G Weight:100g

ROEBUCK STEEL WOOL 00 250G

LEVEL, LASER IN ALUMINIUM BOX

DRAPER MULTITESTER MT1 Available until stocks are exhausted

TOOLS,SCREWDRIVERS,TORX,TORX, SCREWDRIVE

TOOLS,SCREWDRIVERS,SETS,ACU-MIN MINIATUR

DRAPER 13 AMP SOCKET TESTER

ELECTRONIC MANIFOLD Accuracy, percentage:0.5% Battery size code:9 V Depth, external:34.3mm IP rating:IP65 Length / Height, external:175mm Memory size:8 KB Pressure measuring ranges:0

MIRROR, INSPECTION Diameter, external:30mm Length:215mm Weight:42g

CUTTERS, STRIPPERS 120MM Length:120mm Capacity, cutting:30-42 AWG Length, head:21mm

ELECTRONIC MANIFOLD Accuracy, percentage:0.5% Battery size code:9 V Depth, external:34.3mm IP rating:IP65 Length / Height, external:175mm Memory size:8 KB Pressure measuring ranges:0

LATHE MANDREL H&G 22MM 5570-222

LATHE MANDREL H&G 3/8" 5571-106

LATHE MANDRELH&G 7/8" 5571-114

LATHE MANDREL H&G 11/4" 5571-120

M&W 50-6"(150MM) DIVIDERS

BUBBLE ETCH TANK

UNIVERSAL TANK Capacity:5l Depth, external:522mm Length / Height, external:375mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, supply:240V Width, external:178mm

ETCH / WASH TANK

THREE TANK UNIT Capacity:5l Depth, external:525mm Length / Height, external:380mm Power, AC:500VA Temperature, max:65?В°C Temperature, min:10?В°C Voltage, supply:240V Width, external:400mm

GAUGE BLOCK SET Range, measuring max:1.09mm Range, measuring min:1.01mm Standard:

GAUGE BLOCK SET Range, measuring max:1.49mm Range, measuring min:1.01mm Standard:

TIP, SC7000 ULTRASLIM 0.8MM DIA Temp, op. max:500?В°C Diameter, external:0.8mm Tip type:Ultra Slim

TESTER, LINEAR IC Battery size code:PP3 Depth, external:195mm Digits, number of:16 Length / Height, external:45mm Width, external:100mm Available until stocks are exhausted Alternative available

Snap-On Lens For Use With:LUXOs KFM Seri

Swing-Away Lens For Use With:LUXOs KFM Series Illuminated Magnifiers Refractive Power:10-Diopter Color:Light Gray 52F8889

MEASURING,FEELER GAUGE,FEELER GAUGE,MEASURING, FEELER GAUGE,MEASURING EQUIPMENT,FEELER GAUGES ,PEC (PRODUCT ENGINEERING CORP) 95B9663

Tools, Data capture

MANOMETER

MANOMETER

CARRY CASE 1175 Depth, external:50mm Length / Height, external:85mm Width, external:295mm

ABRASIVE BELT MACHINE 50X (D)

STELLITE DRILL 1/4" Diameter, External:1/4" Diameter, drill bit Imperial:1/4" Material:Stellite

STELLITE DRILL 13/32" Diameter, External:13/32" Diameter, drill bit Imperial:13/32" Material:Stellite

STELLITE DRILL 3/4" Diameter, External:3/4" Diameter, drill bit Imperial:3/4" Material:Stellite

STELLITE DRILL 5/16" Diameter, External:5/16" Diameter, drill bit Imperial:5/16" Material:Stellite

STELLITE DRILL 5/8" Diameter, External:5/8" Diameter, drill bit Imperial:5/8" Material:Stellite

STELLITE DRILL 7/32" Diameter, External:7/32" Diameter, drill bit Imperial:7/32" Material:Stellite

STELLITE DRILL 9/32" (7.00 MM) Diameter, External:9/32" Diameter, drill bit Imperial:9/32" Material:Stellite

PROTRACTORS, UNIVERSAL Accuracy:?В± 2 minutes Angle:320?В° Angle, min:0?В° Material:Stainless Steel / Alloy Steel

M&W 51-10"(250MM) INSIDE CALIPERS

M&W 51-3"(75MM) INSIDE CALIPERS

M&W 51-6"(150MM) INSIDE CALIPERS

5100 AIR PROBE

VOLTAGE TESTER LSP-1 Current, input:30mA Resistance:500kR Safety category:VDE0680/5 IP65 Voltage rating, AC:690V Voltage rating, DC:690V

MANOMETER , DIFFERENTIAL

MANOMETER , DIFFERENTIAL

HOLE SAW, ONE PIECE 64MM Size:64mm

CUTTERS, SIDE SEMI FLUSH 115MM Capacity, cutting copper wire:1.61mm Length:115mm Edge Finish/Profile:Semi Flush Length, jaw:10mm

MANOMETER(0 TO2000 MBAR) Accuracy, percentage:0.5% Battery size code:9V Depth, external:42mm Length / Height, external:191mm Pressure measuring ranges:0 to 2000 hPa Resolution:1 hPa Temp, op. max:60?В°C Temp, op. m

MANOMETER (0TO2HPA/MBAR) Accuracy, percentage:0.5% Battery size code:9V Depth, external:42mm Length / Height, external:191mm Pressure measuring ranges:0 to 2 hPa Resolution:0.001 hPa Temp, op. max:60?В°C Temp, op.

MANOMETER, 0-200MBAR Accuracy, percentage:0.5% Depth, external:42mm Length / Height, external:202mm Pressure measuring ranges:0 to 200 mbar Temp, op. max:60?В°C Temp, op. min:0?В°C Temperature, storage max:70?В°C Tempe

MANOMETER, 0-2MBAR Accuracy, percentage:0.5% Depth, external:42mm Length / Height, external:202mm Pressure measuring ranges:0 to 2 mbar Temp, op. max:60?В°C Temp, op. min:0?В°C Temperature, storage max:70?В°C Temperatu

HOLE SAW, VARIPITCH HSS 35MM Diameter, external:35mm Capacity, cutting:35mm

CAROLUS 1/2"SQ. FLEX HD RATCH Driver size:1/2 "

HOLE SAW, VARIPITCH HSS 51MM Diameter, external:51mm Capacity, cutting:51mm

HAMMER, CLUB 2.1/2LB Weight:1134g Head type:Club Handle type:Hickory Head Material:Hardened and tempered high carbon steel

HOLE SAW, VARIPITCH HSS 60MM Diameter, external:60mm Capacity, cutting:60mm

QUICK-GRIP BAR CLAMP 305MM/12IN 512QC Capacity, jaw max:305mm

HAND MAGNIFIER 5147ILLUMINATED

J&S STD REV LATH CNTR 4MT PRV LNZR 5150 Available until stocks are exhausted

HOLE SAW, VARIPITCH HSS 89MM Diameter, external:89mm Capacity, cutting:89mm

J&S H/D REV LATH CNTR 3MT PRV LNZR 5155

J&S H/D REV LATH CNTR 5MT PRV LNZR 5155

CRIMP TOOL RACK/PANEL

TOOLS,CRIMP,HAND,CRIMP TOOL FOR EDAC RACK AND PANEL CONNECTORS,RACK & PANEL CONNECTORS,516 SERIES RACK AND PANEL CONNECTORS ,EDAC 95F3212

TABLE BASE MAGNIFIER 5175

HOLE SAW, VARIPITCH HSS 25MM Diameter, external:25mm Capacity, cutting:25mm

CALLIPERS, VERNIER 6"/150MM Graduation:0.02mm Length, jaw:1.6" Range, measuring max:150mm Range, measuring min:0mm

M&W 52-10"(250MM) OUTSIDE CALIPERS

M&W 52-3"(75MM) OUTSIDE CALIPERS

M&W 52-6"(150MM) OUTSIDE CALIPERS

REMS AMIGO 1 THREADING MCH BSPT

SOFTWARE FOR TESTER ULTRA 0751

PORTABLE VDE AUTO-TESTER 0701/2S Depth, external:60mm Interface type:RS 232 Length / Height, external:150mm Memory size:2 Mbytes Resistance:1000mR Safety category:DIN VDE0701,0702 , BGV A2 Temp, op. max:50?В°C Temp

ARBOR, PIN DRIVE 11MM HEX SHFT Material:HSS

HAND MAGNIFIER 52066X

EDUC. BOARD PM1A/AUTOT.0701/2S SOFTWARE Current rating:16A Depth, external:150mm Length / Height, external:800mm Safety category:VDE0701/0702 Voltage, working:42V Weight:34kg Available until stocks are exhausted

ADAPTOR, BATTERY

HAND MAGNIFIER 52162.3X

HI PWR HALOGEN ILLUM MAGNIFR 5226/10 6X

MAGNIFIER CLIP ON X3.5 Depth, external:11mm Height:50mm Magnification factor:3.5 Width, external:35mm

CUTTERS, SIDE FULL FLUSH 115MM Capacity, cutting copper wire:1.2mm Length:115mm Edge Finish/Profile:Full Flush Length, jaw:12mm

SOCKET, 3/8" EXTRA DEEP 14MM Driver size:3/8" AF size:0.550" Length:63mm Length, spindle:50mm Socket Reach:14mm Width, AF:14mm Available until stocks are exhausted

QUICK-GRIP BAR CLAMP 915MM/36IN 536QC Capacity, jaw max:915mm

Tools, Fish Tapes Size/Dimensions:12 ft

REMS AMIGO 2 THREADING MACHINE NPT

EYE MAGNIFIER 5404

EYE MAGNIFIER 5408

CABLE TRACER/IDENTIFIER Battery size code:PP3

S&J TENON SAW R52 10" TPI (f):13

PLUG-1/4 DUST

HOOK SET, 6 PIECE Weight:45g Available until stocks are exhausted Alternative available

Drill Bit 19C9163

DIAMOND WHEEL Diameter, blade/disc:22.2mm Diameter, orbit:3.2mm

STEEL WOOL 1 1KG Weight:1kg

STEEL WOOL 00 1KG Weight:1kg

STEEL WOOL 1 250G Weight:250g

STEEL WOOL 0 250G Weight:250g

STEEL WOOL 0 100G Weight:100g

ST WOOL 00 S/FINE PADS Weight:5kg

QUICK-GRIP CLAMP MODEL 546 Capacity, jaw max:150mm Available until stocks are exhausted

CIRCULAR SAW, 190MM SKIL 230V Bore size:30mm Depth, cutting max:66mm Diameter, blade/disc:190mm Power, input:1250W Speed, no load:5500rpm Voltage, input:230V Available until stocks are exhausted

TOOLS,SCREWDRIVERS,SETS,ACU-MIN MINIATUR

TOOLS,DRIVERS,SETS,LIGHTWEIGHT TUBE HEX

TOOLS,DRIVERS,SETS,LIGHTWEIGHT TUBE SLOT

QUICK-GRIP BAR CLAMP 1270MM/50IN 550QC Capacity, jaw max:1270mm

MIRROR, INSPECTION Diameter, external:28mm Length:225mm Weight:15g

BLADE, DIAMOND LASER 230MM Material:Diamond Length, blade:230mm Blade form/cut:DIAMOND LASER Bore size:22.2mm Speed, no load:6650rpm Available until stocks are exhausted Alternative available

DRILL SLEEVE USE-EM-UP 4-5 MT 5545-405

ELECTRONIC MANIFOLD Accuracy, percentage:0.5% Battery size code:9 V Depth, external:34.3mm IP rating:IP65 Length / Height, external:175mm Memory size:8 KB Pressure measuring ranges:0

LATHE MANDREL H&G 27MM 5570-227

LATHE MANDREL H&G 5/8" 5571-110

LATHE MANDREL H&G 1" 5571-116

TOOLS,INSPECTION,MIRRORS,INSPECTION MIRROR, OVAL, 1 INCH X 2 INCH,HAND TOOLS,INSPECTION MIRRORS AND MAGNIFIERS ,GENERAL (TOOLS) 34F443